Leica usb cable driver for windows 7: How to access your data and update your firmware - Surveying Equipment
- How to obtain the usb cable driver from different sources- How to install the usb cable driver on your PC- How to connect your Leica device to your PC and access your data- Conclusion: Summary and benefits of using Leica usb cable driver H2: Introduction: What is Leica usb cable driver and why you need it - Explain what is Leica usb cable driver and what it does- Mention the supported devices and operating systems- Highlight the advantages of using Leica usb cable driver H2: How to obtain the usb cable driver from different sources - Explain how to get the usb cable driver from the USB card delivered with each device- Explain how to get the usb cable driver from myWorld website- Provide the links and steps for downloading the usb cable driver H2: How to install the usb cable driver on your PC - Explain how to run the appropriate .exe file depending on your operating system- Explain how to follow the instructions in the setup routine- Explain how to ensure that any Leica device is unplugged from your PC during the installation H2: How to connect your Leica device to your PC and access your data - Explain how to turn on your Leica device and connect it to your PC with the appropriate cable- Explain how to type \\\\192.168.254.1\\ or \\\\192.168.254.3\\ into the search field of your PC- Explain how to browse the folders of your device and copy and paste files as required- Provide some information on the folder structure of your device H2: Conclusion: Summary and benefits of using Leica usb cable driver - Summarize the main points of the article- Emphasize the benefits of using Leica usb cable driver for transferring data and connecting to myWorld- Provide a call to action for readers to try out Leica usb cable driver # Article with HTML formatting Leica usb cable driver for windows 7: How to connect your Leica device to your PC
If you are a user of Leica devices, such as CS20 field controller, TS16 or TS60 total station, or MS60 MultiStation, you might want to connect them to your PC for various purposes, such as transferring data, updating firmware, or accessing myWorld. To do that, you need a special software called Leica usb cable driver, which enables communication between your device and your PC via USB cable. In this article, we will show you how to obtain, install, and use Leica usb cable driver for windows 7 operating system.
Leica Usb Cable Driver For Windows 7
Introduction: What is Leica usb cable driver and why you need it
Leica usb cable driver is a software that allows you to connect your Leica device to your PC via USB cable. It creates a virtual network connection between your device and your PC, so that you can access the files and folders of your device from your PC's file explorer. You can also use Leica usb cable driver to connect your device to myWorld, which is a web portal that provides you with various services and information related to your Leica products.
Leica usb cable driver supports different types of devices and operating systems. You can use it for CS20 field controller, TS16 or TS60 total station, or MS60 MultiStation running Leica Captivate software. You can also use it for SmartWorx Viva instruments running Windows Mobile operating system. The drivers support Windows 7, Windows 8 (8.1), and Windows 10 operating systems on your PC.
Using Leica usb cable driver has many advantages. It allows you to easily transfer data between your device and your PC, such as projects, measurements, images, or documents. It also allows you to update the firmware of your device or install new applications from myWorld. Moreover, it enables you to access myWorld services and information from your device, such as product registration, warranty status, technical support, training materials, or software updates.
How to obtain the usb cable driver from different sources
There are two ways to get the usb cable driver for your device: from the USB card delivered with each device or from myWorld website.
If you have received a USB card with your device, you can find the usb cable driver in the Leica Driver installation folder on the USB card. You just need to insert the USB card into your PC and open the folder.
If you have registered your device on myWorld website, you can also download the usb cable driver from there. You just need to log in to myWorld with your username and password, go to myProducts section, select one of your registered devices, open the Tools tab, and press the Download button next to the USB Driver file.
The links for downloading the usb cable driver from myWorld are as follows:
Setup_Leica_USB_32bit.exe for 32bit PCs
Setup_Leica_USB_64bit.exe for 64bit PCs
Setup_Leica_USB_64bit_itanium.exe for 64bit servers and high performance PCs
How to install the usb cable driver on your PC
Once you have obtained the usb cable driver file for your operating system, you need to install it on your PC. The installation process is very simple just follow these steps:
Double click on the .exe file that you have downloaded or copied from the USB card.
The setup routine will start and ask you for administrative privileges. Click Yes or Allow if prompted.
If Windows Mobile Device Center is not already installed on your PC, it will be installed additionally. Click Install or Next when asked.
Follow the instructions in the setup routine until it finishes.
Ensure that any Leica device is unplugged from your PC during the installation of the USB cable drivers.
How to connect your Leica device to your PC and access your data
After installing the USB cable drivers on your PC, you can connect your Leica device to your PC and access your data. Here is how:
Turn on your Leica device and connect it to your PC with the appropriate cable. The following cables can be used:
Cable nameConnector 1 (to instrument)Connector 2 (to PC)
GEV234Lemo 1, 8 pinUSB type A
GEV261Lemo 1, 8 pinUSB type A
GEV223Mini USB type BUSB type A
On your PC, press the Windows Start icon and type \\\\192.168.254.1\\ (for CS20, TS60, and MS60) or \\\\192.168.254.3\\ (for TS16) into the search field, including all \\, and press Enter.
File Explorer will open and it is now possible to browse the folders of your device and copy and paste files as required.
The folder structure of your device depends on its type and software version. Below is some information on some common folders:
The Internal Memory folder contains all files stored in your device, such as projects, measurements, images, or documents.
The SD Card folder contains all files stored in the external SD card of your device, if inserted.
The System folder contains system files and settings of your device. You should not modify or delete any files in this folder unless instructed by Leica technical support.
The myWorld folder contains files related to myWorld services and information, such as product registration, warranty status, technical support, training materials, or software updates.
Conclusion: Summary and benefits of using Leica usb cable driver
In this article, we have shown you how to obtain, install, and use Leica usb cable driver for windows 7 operating system. Leica usb cable driver is a software that allows you to connect your Leica device to your PC via USB cable and access your data. It also enables you to update the firmware of your device or install new applications from myWorld. Moreover, it allows you to access myWorld services and information from your device.
Using Leica usb cable driver has many benefits for Leica users. It makes data transfer easy and convenient. It helps you keep your device up to date and functional. It provides you with valuable information and support for your Leica products. It enhances your productivity and efficiency with Leica devices.
If you have a Leica device and a windows 7 PC, we recommend you to try out Leica usb cable driver and see for yourself how it can improve your workflow and experience. You can download it from the USB card delivered with your device or from myWorld website. You can install it on your PC in a few simple steps. You can connect your device to your PC and access your data with a few clicks. You can enjoy the advantages of using Leica usb cable driver for your Leica device.
FAQs
Here are some frequently asked questions about Leica usb cable driver:
Q: Does Leica usb cable driver work for other operating systems besides windows 7?A: Yes, Leica usb cable driver supports Windows 7, Windows 8 (8.1), and Windows 10 operating systems on your PC.
Q: Does Leica usb cable driver work for other devices besides CS20, TS16, TS60, or MS60?A: Yes, Leica usb cable driver also works for SmartWorx Viva instruments running Windows Mobile operating system.
Q: What is the difference between GEV234 and GEV261 cables?A: Both cables have Lemo 1, 8 pin connector on one end and USB type A connector on the other end. The difference is that GEV234 cable is 2 m long and GEV261 cable is 5 m long.
Q: What is the difference between \\\\192.168.254.1\\ and \\\\192.168.254.3\\?A: These are the IP addresses of your device when connected to your PC via USB cable. You need to type \\\\192.168.254.1\\ to access CS20, TS60, or MS60 devices and \\\\192.168.254.3\\ to access TS16 devices.
Q: What is myWorld and how can I access it?A: myWorld is a web portal that provides you with various services and information related to your Leica products. You can access it from your PC by logging in to https://myworld.leicageosystems.com with your username and password or from your device by connecting it to myWorld via USB cable or WLAN.
